Konica Minolta BIZHUB C360 - Manual (Page 213)

bizhub C360/C280/C220 9-11
9.3 If print quality is deteriorated 9
9.3 If print quality is deteriorated
Cleaning the Electrostatic Charger Wire
If the Electrostatic Charger Wire is dirty, streaks will appear though the printed images. If this occurs, follow
the procedure described below to clean the Electrostatic Charger Wire.
1
Open the Front Door.
2
Slowly pull out the Charger Cleaner as far as possible. Next,
slowly push in the charger-cleaning tool as far as possible.
Repeat the above operations three times.
3
Securely insert the Charger Cleaner, and then close the Front Door.
Cleaning the Printhead
If the Printhead becomes dirty, print quality may be reduced. If this occurs, clean the Printhead according
to the following procedure.
1
Open the Front Door.