Konica Minolta BIZHUB C360 - Manual (Page 248)

bizhub C360/C280/C220 11-15
11.1 Using authentication unit (IC card type) 11
14
Turn the Main Power Switch of this machine off, connect the authentication unit to this machine, and
turn the Main Power Switch of this machine on.
NOTICE
To turn the Main Power Switch off and on, first turn the Main Power Switch off, and then turn it on
after 10 or more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
11.1.3 Logging in to this machine
This section explains how to log in to this machine with IC card authentication.
- To use authentication unit (IC card type), register the information recorded in the IC card in advance.
- If authentication fails frequently, IC card information may not be registered properly. Register IC card
information again.
- When the IC Card authentication is enabled, a registered user is authenticated by simply placing the IC
card. Authentication is carried out when you place the IC card and enter the [Password] when both IC
cards and passwords are used for authentication.
- Press [ID & PW] to [Login] by entering the [User Name] and the [Password], without using the authenti-
cation unit.
When [Card Authentication] is enabled
%
Place the IC card on the Working Table WT-507 or Working Table WT-506.
The basic settings screen appears.