Konica Minolta BIZHUB C360 - Manual (Page 62)

bizhub C360/C280/C220 5-5
5.1 [Basic] 5
5.1.2 [Paper]
Select the paper type and size to be printed or change the paper size and paper type settings configured for
each paper tray.
The paper size can be selected automatically according to the original size or it can be specified manually.
0 When you select [Transparency], specify [Black] for [Color] in advance.
0 The auto zoom setting and the auto paper setting cannot both be selected at the same time.
0 If a setting for special paper is selected for a paper tray, that tray is not selected automatically with the
Auto Paper setting. (However, a paper tray set to Single Side Only is given priority to be selected with
1-sided printing.) When setting special paper in the paper tray, be sure to set the paper type. For details
on special paper, refer to page 12-2.
%
Press [Basic] ö [Paper].
Settings
[Auto] Automatically selects the paper size according to the original
size.
1 to 4 Trays Allows you to specify the paper manually.
# [Bypass Tray]
[Change Tray Settings] Specify the paper type and paper size for the selected paper
tray.
[Paper Type] Specify the paper type for the selected pa-
per tray.
[Paper Size] Specify the paper size for the selected pa-
per tray.
[Auto Detect]:
Automatically detects the paper size.
[12-1/4e18 w] (Only for [Tray 2]):
Enables 12-1/4e18 w to be selected.
[Standard Size] (only for [Bypass Tray]):
Specify a paper size to use the bypass tray
as a paper tray dedicated to the paper size.
[Custom Size] (only for [Bypass Tray]):
Enter the paper size.
[Wide Paper]:
Select a paper size larger than the original.