Konica Minolta BIZHUB C360 - Manual (Page 79)

bizhub C360/C280/C220 5-22
5.4 [Application] 5
5.4.1 [Sheet/Cover/Chapter Insert]
[OHP Interleave]
Prevent copies printed onto OHP transparencies from sticking together because of the heat produced during
copying by having paper (interleaves) inserted between the transparencies.
0 Printing on OHP transparencies is possible only in black.
0 Use interleaf paper with the same size as the OHP transparencies.
0 The number of copies is fixed to one. The number value cannot be changed.
0 The finishing function cannot be changed.
0 Load transparencies into the Bypass Tray.
0 Do not use a transparency that has been through the machine even once. It may lead to reduced print
quality, a paper jam or a damage to the machine. (Even if a transparency has been discharged without
printing, it cannot be reused.)
1
Load the original.
2
Press [Basic] ö [Color] ö [Black].
3
Load transparencies into the Bypass Tray. Load the interleave paper into the desired paper tray.
4
Set the [Paper Type] of the Bypass Tray to [Transparency] and press [OK].
5
Press [Application] ö [Sheet/Cover/Chapter Insert] ö [OHP Interleave].
d
Reference
Setting Black for Color Settings:
Press [Basic] ö [Color] ö [Black].
Settings
[Interleave Paper] Select the paper tray loaded with paper with a transparency interleaf.
[Transparency] Indicates the paper size of the loaded transparency.
E F G H
E F G H
E F G H E F G H
E F G H
E F G H
E F G H
E F G H
E F G H