Switching to the entry or selection screen, Precautions on using the touch panel – Konica Minolta bizhub 4050 User Manual
Operating the Touch Panel
Switching to the entry or selection screen
Tap a target input area or icon to switch to the entry or selection screen.
Used to switch to the Select screen to enter text or select a registered item.
Precautions on using the Touch Panel
This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Use your finger or the Stylus Pen. Note that the Touch Panel will not respond appropriately if you op-
erate it using your nail or a pen tip instead of your finger or the Stylus Pen.
Applying a strong force to the Touch Panel will damage the Touch Panel, and potentially cause a
When operating the Touch Panel, do not press on it using excessive force or with a pointed object such
as a mechanical pencil.
Be careful not to operate Touch Panel with wet fingers. It may cause Touch Panel to operate in unex-
If you operate the Touch Panel with a gloved finger, the Touch Panel will not respond normally. You
should operate it with a bare finger or using the Stylus Pen.
Note that the Touch Panel may not respond normally if the distance between the user and fluorescent
light is 19-11/16 inches (500 mm) or less when you operate the Touch Panel.
You must not use the Touch Panel beside equipment that generates electrical noises such as an electric
generator or air conditioner. Otherwise a malfunction may be caused by an influence of electrical nois-