2 introduction of copy function, Introduction of copy function -17 – Konica Minolta bizhub 4050 User Manual

Page 59

Advertising
background image

bizhub 4750/4050

5-17

5.4

Using the copy function

5

5.4.2

Introduction of copy function

This section describes the convenient copy functions. For details on how to use each function, refer to [User's
Guide Copy].

Function

Overview

[Interrupt]

If you urgently want to make a copy, even if the machine is printing an original,
you can interrupt the active job and make an intruder copy.

[Proof Copy]

Before beginning actual copying, do a single test copy and check it is accept-
able.
When making a large number of copies, use the proof copy function to prevent
a large number of copy errors from occurring.

[ID Copy]

When you want to copy cards, such as an insurance card, a driver license card
and a business card, you can arrange the front and back sides of the card on
a single page and copy the images on to the same side of one sheet. This can
reduce the number of sheets used.

[Density]

Adjust the density of a copy image.

[Original Type]

Select the optimum settings for the original to copy it at the optimum image
quality level.

[Original Size]

Select the size of the original to be scanned.

[Paper]

Select the size and type of the paper for copying. You can also change the size
and type settings of the paper loaded in paper trays.

[Zoom]

You can copy an original image enlarged or reduced by an arbitrary zoom ratio.

[Duplex/Combine]

Copy an original onto both sides of paper. A multi-page original can be re-
duced and copied on the same side of a single sheet of paper.

[Finishing]

you can select whether to sort the output sheets or group them when printing
multiple sets of copies.
When the optional Finisher is installed, you can staple printed sheets of paper.

[Separate Scan]

If the number of original sheets is so large that they cannot be loaded into the
ADF at the same time, you can load them in several batches and handle them
as one job.

[Background Removal]

You can adjust the background density of an original with the colored back-
ground such as newspaper or an original made with recycled paper.

[Image Adjust]

You can adjust the color quality level of the original for copying.

[Page Margin]

If you want to add a binding margin to bind copied sheets, you can adjust the
margin size.

[Frame Erase]

Erases the four sides of the original to the same width. You can also specify
the width to be erased for each side.

[Date/Time]

Add a date and time to make a copy.

[Page Number]

Add page numbers to make a copy.

[Stamp]

Add text such as "Circular Notice" or "All rights reserved" to make a copy.

[Watermark]

Add text such as "COPY" or "Confidential" in the center of each page in a tint
color to make a copy.

[Distribution Control
Number]

When printing multiple sets of copies, add copy numbers to make a copy.

Advertising
This manual is related to the following products: