Konica Minolta bizhub 4050 User Manual
Loading paper into the Manual Feed Tray
Hold the paper guide tab located at the left end, then move the paper guide to match the width of the
paper to be loaded.
With the side to be printed on facing up, insert the paper as far as possible into the feed slot.
% If paper is curled, flatten it before loading.
Load paper within the guide indicating the upper limit.
Align the paper guide to the paper size.
Change the paper type and paper size on the Control Panel. When loading custom sized paper, also
specify the paper size.
% To configure settings: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting] - [Paper Tray] -
This manual is related to the following products: