Konica Minolta bizhub 4050 - Manual (Page 35)

bizhub 4750/4050 3-9
3.3 Loading paper into Tray 1 3
4
Load paper into the tray with the print side facing down.
% If paper is curled, flatten it before loading.
% To load long paper such as A4, letter size, or legal size, hold the lengthwise paper guide tab, then
slide the paper guide backward to match the paper length.
% If legal-size paper is loaded, the lengthwise paper guide tab is beyond the length of the tray base,
and it may cause paper to become dusty. To protect paper against dust, purchase and mount a
dust cover. For details, contact your service representative.
% To load A6 paper, hold the lengthwise paper guide tab and slide it up to the A6-size position in the
center of the tray.
% Check that the crosswise and lengthwise paper guides match the paper size indicators on the bot-
tom of the tray.
NOTICE
Do not load paper above the upper-limit indicator mark.
5
Align the paper guide to the paper size.
6
Close Tray 1.
7
Change the paper type and paper size on the Control Panel.
% To configure settings: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting] - [Paper Tray] -
[Tray 1]