Konica Minolta bizhub 4050 User Manual

Page 64

background image


bizhub 4750/4050

Registering a destination







Destination registration number. The smallest available number that is not
used is automatically assigned.


Enter the destination name (using up to 72 characters).


Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorite], enabling you to easily specify a destination.


Select a corresponding character so that the destination can be index
searched by name.


Register information of the destination FTP server.

[Host Name]

Enter the host name or IP address of the destination FTP server (using up to
253 bytes).

Example of host name entry: "host.example.com"

Example of IP address (IPv4) entry: ""

Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[File Path]

Enter the name of the storage folder in the FTP server specified in [Host Name]
(using up to 127 bytes).

Entry example: "scan"

When specifying a folder in the FTP folder, insert a symbol, "/", between the
folder names.

Entry example: "scan\document"

When the file path is not specified, only enter the "/".

Entry example: "/"

[User ID]

If authentication is required in the destination FTP server, enter the available
user name to log in (using up to 63 bytes).


Enter the password (using up to 127 bytes).

[Detail Setting]

Configure settings to establish communications with the FTP server.

[Port No.]: If necessary, change the port number. Normally, you can use the
original port number. [21] is specified by default.

[Pasv]: If the PASV mode is used in your environment, select [ON]. [ON] is
specified by default.

[Proxy]: If a proxy server is used in your environment, select [ON]. [OFF] is
specified by default.

This manual is related to the following products: