Konica Minolta bizhub 4050 - Manual (Page 55)

bizhub 4750/4050 5-13
5.3 Using the fax function 5
5.3.3 Introduction of fax transmission function
This section describes convenient fax transmission functions. For details on how to use each function, refer
to [User's Guide Fax].
5.3.4 Introduction of fax receiving function
This section describes the convenient fax receiving functions. For details on how to use each function, refer
to [User's Guide Fax].
Function Overview
Timer TX Timer TX automatically starts sending at a specified time if the time is pre-
specified.
Check Dest. & Send Check Dest. & Send checks the fax number specified for the fax transmission
against the destination fax number (CSI) and sends the fax only when they
match.
F-Code TX F-Code TX specifies the F code (SUB address and sending ID) to send a fax.
Confidential communication and relay distribution request are available.
•
The confidential communication function is designed to communicate with
specific people using a Confidential RX User Box that requires a registered
number and a password.
• Relay distribution request is a function that the relay station, which has re-
ceived a fax, distributes the received fax to a pre-registered group.
Quick Memory TX Fax transmission starts concurrently with scanning one page. The total num-
ber of pages transmitted can be entered in the sender record.
Password TX Password TX sends a fax with a password. It is used to send faxes to a device
on which fax peers are restricted by passwords (a device with Closed Network
RX enabled).
Polling TX Polling TX stores a file beforehand on the internal hard disk and sends it out
upon a request for reception (polling request) from the recipient.
Function Overview
In-memory proxy re-
ception When the machine cannot print a received fax due to paper jam or exhaustion
of consumables, this function stores the received fax in memory until this ma-
chine is ready to print.
TSI Routing TSI (Transmitting Subscriber Identification) Routing automatically forwards a
received fax to the pre-specified destination (SMB, FTP, or E-mail (Internet fax)
destination) based on the sender's fax number (TSI).
Forward TX Forward TX transfers a received fax to a pre-specified destination (fax, E-mail,
or Internet fax destination).
Memory RX Memory RX saves a received fax in this machine's memory without printing it.
You can check the contents of the received fax and print out only the required
one.
Confidential RX Confidential RX is designed to communicate with specific people using a Con-
fidential RX User Box that requires the registration number and password.
Closed Network RX Closed Network RX restricts the peers by passwords.
Polling RX Polling RX receives a polling file saved in a sending machine as instructed from
this machine.
PC-Fax RX PC-Fax RX saves the received fax in memory. The saved fax can be printed or
downloaded, if necessary.
Night RX Night RX prohibits printing of faxes received in the pre-specified nighttime
zone.