Konica Minolta bizhub C650 - Manual (Page 176)

C650 3-55
Specifying Utility mode parameters 3
3.12 Open API Settings
Select whether or not the interface is open to software with a function for communicating with the machine.
The settings for "Access Setting", "Port Number", "SSL" and "Authentication" for Open API can be changed.
2
Note
If authentication is performed with PageScope Authentication Manager, specify the SSL/TLS settings,
and then enable the "SSL" of the TCP Socket and OpenAPI settings.
For details on the TCP Socket settings, refer to "TCP Socket Settings" on page 4-78.
Access Setting
Select whether or not to permit access from other systems that use Open API. (The default setting is "Allow".)
1
Touch [System Connection] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 3-5.
2
Touch [1 Open API Settings] in the System Connection screen.
3
Touch [Access Setting] in the Open API Settings screen.
Buttons for the available settings appear.
4
Touch the button for the desired setting.
– To permit access using Open API, touch [Allow].
– To prohibit access using Open API, touch [Restrict].
– Access using Open API is set to be permitted or prohibited.
5
Touch [OK].