23 ping confirmation, Ping confirmation -100 – Konica Minolta bizhub C650 User Manual
Page 280
C650
4-100
Network Settings
4
4.23
PING Confirmation
Specify the settings for checking the TCP/IP network by pinging. Specify the address to be used to verify
whether or not the network is connected.
1
Touch [5 Network Setting] in the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 3-5.
2
Touch [Fwd.
→] in the Network Settings screen, and then touch [5 Detail Settings].
3
Touch [5 PING Confirmation].
The PING Confirmation screen appears.
4
Touch [Host Address].
The Host Address screen appears.
5
Select the method for specifying the host address.
–
To specify the host address as an IPv4 address, touch [IPv4 Address Input].
–
To specify the host address as an IPv6 address, touch [IPv6 Address Input].
–
To specify the host address as a host name, touch [Host Name Input].
–
When [Host Name Input] is touched, check that the DNS setting is correctly specified. For details,
refer to "TCP/IP Settings" on page 4-12.
6
Type in the host address (255 characters or less for a host name), and then touch [OK].
–
To correct the entered IP address, touch [
←] or [→] to move the cursor to the character to be
changed, touch [Delete], and then type in the desired number.
–
To clear all entered values, press the [C] (clear) key.
–
For details on typing in text using the keyboard that appears in the touch panel, refer to "Entering
text" on page 6-3.
7
Touch [Check Connection].