Konica Minolta bizhub C650 - Manual (Page 18)

C650 1-2
Before using scanning functions 1
1 Before using scanning functions
1.1 Environment required for using scanning functions
The following conditions are required in order to use the network scanning features.
- The machine is connected to the network. (required)
The machine can be used over a TCP/IP network. First, connect the cable for connecting to the
network. For details, refer to "Network connection" on page 1-7. In order to use this machine on a
network, settings such as the IP address of the machine must be specified. For details, refer to chapter
4, "Network Settings" on page 4-2.
- The driver software is installed on the computer.
In order to use this machine as a scanner, the dedicated software KONICA MINOLTA TWAIN must be
installed. For details, refer to the TWAIN driver manual on the User Software CD-ROM.