Konica Minolta bizhub C650 - Manual (Page 229)

C650 4-49
Network Settings 4
Setup LDAP screen 5/6
Setup LDAP screen 6/6
All screens
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 3-5.
2
Touch [6 LDAP Settings] in the Network Settings screen.
3
Touch [2 Setting Up LDAP].
The Setup LDAP screen appears.
Parameter Description
Select Server Authentica-
tion Method Select the method that is used with user authentication.
Use Settings: Authentication is performed with the settings specified in Setup LDAP
screen 6/6.
User Authentication: If a user is logged on to the copier with external server authenti-
cation, the user name used with external server authentication is automatically entered
in the LDAP server logon screen.
Dynamic Authentication: When using the LDAP search function, a user name and
password is requested.
Referral Setting Select whether or not the referral setting is used.
If referral is used, the search base that was specified in the LDAP server settings
searches the upper and lower levels as the starting point.
Parameter Description
Login Name Specify the logon name for connecting to the LDAP server. Use the keyboard that ap-
pears in the touch panel to type in the logon name (255 characters or less).
Password Specify the password for connecting to the LDAP server. Use the keyboard that ap-
pears in the touch panel to type in the password (128 characters or less).
Domain Name Specify the necessary domain name for connecting to the LDAP server. Use the key-
board that appears in the touch panel to type in the domain name (64 characters or
less).
Parameter Description
Check Connection Touch this button to check the connection to the LDAP server.
Reset All Settings Touch this button to reset all LDAP server settings to the defaults.
If a message appears, requesting confirmation to reset the settings, touch [Yes].