Konica Minolta bizhub C650 - Manual (Page 72)

C650 2-45
Scanning 2
2.9 Sending data to a server (WebDAV)
WebDAV
The WebDAV operation can be used in a network environment that contains a server compatible with
WebDAV. The scan data can be sent to a folder specified on the server of the network.
Destinations can be selected using any of the following methods. In addition, the methods can be combined,
for example, by selecting a recipient from a group destination, then adding other destinations through direct
input.
Transmission may not be possible if the document name is too long according to the destination server
conditions. Since the document name is used during transmission, consult your network administrator when
specifying the document name.
Destinations can be selected for WebDAV operations using any of the following methods. For details, refer
to the corresponding section.
!
Detail
If a mail server is available in the network environment, the e-mail notification function can be used to
send notifications that jobs are completed. For details, refer to "URL Notification Setting" on page 2-92.
If a proxy server is available in the network environment, a WebDAV server on the Internet can be
accessed through the proxy server.
For an overview of WebDAV transmissions, refer to "Scan to WebDAV" on page 1-5.
Selecting a destination from the address book
Follow the procedure described below to send data by selecting a recipient from the already registered
destinations.
For details on registering destinations, refer to "Registering an address book destination" on page 3-7.
1
Press the [Fax/Scan] key in the control panel.
The Fax/Scan mode screen appears.
Selection method Page reference
Selecting from the address book p. 2-45
Entering addresses directly p. 2-47
Selecting a group destination p. 2-28
Selecting a destination that was searched for p. 2-31