Konica Minolta bizhub C650 - Manual (Page 198)

C650 4-18
Network Settings 4
2
Touch the button for the desired port.
3
To use the selected port, press the [C] (clear) key to erase the value, and then use the keypad to type
in the RAW port number (between 1 and 65535).
– If a value outside the allowable range is specified, the message "Input error" appears. Type a value
within the allowable range.
– To not use the port, touch [OFF].
4
Touch [OK].
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
The use of RAW ports and the RAW port numbers are specified.
IP Filtering (Permit Access)
Specify the range of IP addresses permitted access.
2
Note
0.0.0.0 cannot be included in a specified range. For example, to specify the range of addresses before
192.168.1.20, specify the range from "0.0.0.1" to "192.168.1.20".
A maximum of five ranges of permitted IP addresses can be specified.
1
Touch [IP Filtering (Permit Access)] in the TCP/IP Settings screen.