Konica Minolta bizhub C650 - Manual (Page 25)

C650 1-9
Before using scanning functions 1
1.4 Using Web services
It is possible to give a scan command from a computer (Windows Vista) on the network or to perform
scanning according to the purpose from the machine and to send the scanned data to the computer. This
section describes settings that should be specified on the computer in advance.
Settings required for using Web services
The following settings are required for using Web services:
- Install the driver of the machine on the computer.
- Specify settings for Web services on the machine.
!
Detail
Settings for Web services on this machine can be specified in the Administrator Settings screen. For
details, refer to "Web Service Settings" on page 4-84.
Installing the driver of this machine on the computer
Before installation, check that "Network discovery" is enabled in [Network and Sharing Center] accessed
from [Control Panel].