Konica Minolta bizhub C650 - Manual (Page 75)

C650 2-48
Scanning 2
3
Type in the destination information.
The entered addresses appear under "Broadcast Destinations".
To specify an additional address, touch [Next Destination], and then enter the information.
4
To specify advanced settings, touch [Detailed Settings], and then specify the settings.
5
Touch [OK], and then touch [OK] in the next screen that appears.
6
Touch [Scan Settings], [Original Settings] or [Communication Settings], and then specify the desired
scan settings.
– For details on the scan settings, refer to "Specifying scan and transmission settings (Scan
Settings/Original Settings/Communication Settings)" on page 2-53.
7
Load the document into the ADF or place it on the original glass.
8
If desired, press the [Proof Copy] key to check a preview image.
– For details, refer to "Sending after previewing" on page 2-15.
9
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
2
Note
Do not turn off the machine until the scan job is deleted from the Job List screen.