Konica Minolta bizhub C650 - Manual (Page 93)

C650 2-66
Scanning 2
Frame Erase (Erase)
An area around the edge of the document can be erased. Areas with a width of 1/16 to 2 inch (0.1 to 50.0
mm) can be specified separately for the left and right sides and the top and bottom.
2
Note
If a width to be erased around the document is specified with "Frame Erase" with the "Book Scanning"
function, the same settings are also applied on the Frame Erase screen (displayed from the Erase
screen).
1
Touch [Scan Settings] in the Fax/Scan mode screen.
2
Touch [Erase].
3
Touch [Frame Erase].
4
Select the width of the area to be erased.
– To use frame erasing, touch [Yes].
– To erase the same width on all sides, touch [Frame], and then specify a value.
– To specify different widths for the top, left, right and bottom, touch the button for the desired
location, and then specify a value. To cancel frame erasing, touch [None].