Konica Minolta bizhub C350 - Manual (Page 10)

1 1.7 Precautions for Operation Control
1-6 bizhub C350
Se
cu
ri
ty
Chap
ter
1
Network Connection Requirements for the Machine
Packets being transmitted over the LAN installed in the office, in which the machine
is installed, should be protected from unauthorized manipulation. If the LAN is to be
connected to an outside network, no unauthorized attempt to establish connection
from the external network should be permitted.
<To Achieve Effective Security>
G If the LAN, in which the machine is installed, is connected to an outside network,
install a firewall or similar network device to block any access to the machine
from the outside network and make the necessary settings.
G Configure the LAN installed in the office, in which the machine is installed, by
using a switching hub and other devices to ensure that the packets are
protected from unauthorized manipulation.
Machine Maintenance Control
G Provide adequate control over the machine to ensure that only the technical
representative is able to perform physical service operations on the machine.
G Provide adequate control over the machine to ensure that any physical service
operations performed on the machine by the technical representative are
overseen by the Administrator of the machine.