Konica Minolta bizhub C350 - Manual (Page 57)

2.11 Administrator BOX Utility Operations 2
bizhub C350 2-47
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
A User Box that no longer exists after the backup operation was performed
(the User Box name was changed or the User Box was deleted) is created
again and the image data file in that User Box is restored. However, the
password for the recreated User Box is the same as the User Box name. (If
the User Box name contains less than 4 characters, “0” is added at the end
of the User Box name to create a 4-digit password.) After the restore
operation, be sure to instruct the user of the User Box to change the
password.
If the computer is left alone while the restore operation is being performed
in Admin. Mode, settings may be changed without permission. After finishing
the restore operation or if the computer must be left alone while the restore
operation is being performed, be sure to quit the restore operation or quit
BOX Utility.
If there is an image data file of the same name as one in the same User Box,
the data will be overwritten during the restore operation.
The date/time of creation of image data files that have been restored are set
to the date/time when the restore operation was performed.