Konica Minolta bizhub C350 - Manual (Page 25)

2.5 HDD Lock function 2
bizhub C350 2-15
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
2.5 HDD Lock function
When access to Admin. Mode is authenticated, a password for locking the hard disk
can be set. This protects the data on the hard disk in case the hard disk is stolen.
The password appears as “*” when it is entered.
If a hard disk is installed on the machine, be sure to use the HDD Lock function.
✎
Note
The HDD Lock function can be set only if a hard disk is installed on the machine.
If the Panel Reset Timer function is set and no control panel operation is
performed for the specified length of time, the control panel is reset and the
Basic screen is displayed. However, if the function was set to “No”, the control
panel is reset and the Basic screen is displayed if no operation is performed for
one minute.
Do not set the password for the HDD Lock function to a birth date, employee
number or any other number that can easily be guessed. In addition, change the
password periodically.
Do not disclose the password to anyone other than the Administrator.
Setting the HDD Lock Function
1 Call the Admin. Mode to the screen from the control panel.
❍ For the procedure to be followed when calling the Admin. Mode to the
screen, see “Accessing the Admin. Mode” on page 2-2.
2 Touch [Admin. Set].