Konica Minolta bizhub C350 - Manual (Page 81)

3.4 User BOX Utility Operations 3
bizhub C350 3-23
Us
er
O
per
ati
o
n
s
Chap
ter
3
6 In the “Password” box, type in the password of 4 or more digits, and then click
the [Connect] button.
The image data in the selected User Box is automatically downloaded and
displayed in a list.
✎
Note
If the entered User Box password was incorrect, the message “Unable to
login on MFP controller.” appears. Click the [OK] button, and then type in the
correct password.
If the Unauthorized Access Lock function is set to “Enable”, incorrectly
entering the password is counted as a failed authentication attempt. If the
password is incorrectly entered three times, the message “The specified box
has been locked.” appears after the fourth failed authentication attempt, and
the password can no longer be entered. To again allow access, the Access
Lock Release function in Admin. Mode must be performed. Contact the
Administrator to perform the Access Lock Release function.
If the User Box is already being accessed, the message “The specified box
does not exist.” appears. Click the [OK] button, and then try accessing the
User Box again after waiting a while.