Konica Minolta bizhub C350 - Manual (Page 15)

2.1 Admin. Mode authentication function 2
bizhub C350 2-5
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
<From PageScope Web Connection>
1 Start the Web browser.
2 Enter the IP address of the machine in the address bar.
3 Press the [Enter] key to start PageScope Web Connection.
4 In the “Administrator’s Code” box at the lower left of the screen, type in the
Administrator Code.
✎
Note
When logging on to Admin. Mode of PageScope Web Connection, use the
same Administrator Code as that used when accessing Admin. Mode from
the control panel of the machine.
5 Click the [Log-in] button to log on to the Admin. Mode.
✎
Note
If the Administrator Code was incorrectly entered, the message
“Administrator’s Number is incorrect.” appears. Click the [OK] button, and
then follow the instructions in the message that appears and type in the
correct Administrator Code.
If the Unauthorized Access Lock function is set to “Enable”, incorrectly
entering the Administrator Code is counted as a failed authentication
attempt. If the Administrator Code is incorrectly entered three times, the
message “Access denied due to unauthorized access.” appears after the
fourth failed authentication attempt, and the Administrator Code can no
longer be entered. To again allow access, turn the machine off, then on
again.