Konica Minolta bizhub C350 - Manual (Page 30)

2 2.5 HDD Lock function
2-20 bizhub C350
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
7 For confirmation, type in the new 8-digit password again, and then touch [Enter].
❍ To display the screen for typing in uppercase letters, touch [CAPS].
❍ To delete the last character entered, touch [Del.].
❍ To return to the screen shown in step 3, touch [Cancel].
✎
Note
If the password was incorrectly entered during confirmation, the message
“The retyped password is incorrect. Input password again.” appears. Be
sure to type in the correct password.
8 Check that the message “Note : Please turn the main switch of the copier OFF/
ON to activate HDD Lock. Do not forget the password.” appears, and then turn
the machine off, then on again.
✎
Note
Do not lose the set password. The password must be entered in order to
change it or to unlock the hard disk.
If the machine is left alone with the Admin. Mode screen displayed, the
Admin. Mode functions may be changed without permission. After using the
Admin. Mode functions or if the machine must be left alone while the Admin.
Mode functions are being set, be sure to return to the Basic screen.