Konica Minolta bizhub C350 - Manual (Page 19)

2.3 Access Lock Release function 2
bizhub C350 2-9
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
2.3 Access Lock Release function
When access to Admin. Mode from the control panel is authenticated, access and
operations are permitted with the Access Lock Release function, which allows
access when it is denied with the Unauthorized Access Lock function.
The Access Lock Release function clears the counts for the number of failed
attempts to access all Locked Jobs and all of the HDD.
✎
Condition
To cancel the Access Lock state, perform the following operation as necessary.
Admin. Mode : Turn OFF the Power Switch and then turn it ON.
Lock Job : Access Lock Release
HDD : Access Lock Release or turn OFF the Power Switch and then turn it ON.
✎
Hint
In this section, Boxes and User Boxes are referred to as “HDD”.
✎
Note
Be careful that the Locked Jobs data will be deleted when the Power Switch is
turned OFF and then ON. Keep this in mind whenever turning power OFF and
ON.
Using the Access Lock Release Function
1 Call the Admin. Mode to the screen from the control panel.
❍ For the procedure to be followed when calling the Admin. Mode to the
screen, see “Accessing the Admin. Mode” on page 2-2.