Accessing the user box, From the control panel – Konica Minolta bizhub C350 User Manual

Page 67

Advertising
background image

3.3 User Box function

3

bizhub C350

3-9

Us

er

O

per

ati

o

n

s

Chap

ter

3

Accessing the User Box

<From the Control Panel>

1

Press the [Box] key.

2

Select the desired Box, and
then touch [Enter].

3

Type in the password
(alphanumeric characters
and symbols) of 4 or more
digits, and then touch
[Enter].

To return to the previous
screen, touch [Cancel].

Note
If the entered password
is incorrect, the message “Password incorrect.” appears. Type in the correct
password.

If the Unauthorized Access Lock function is set to “Enable”, incorrectly
entering the password is counted as a failed authentication attempt. If the
password is incorrectly entered three times, the message “Box selected is
unauthorized Contact administrator” appears after the fourth failed
authentication attempt, and the password can no longer be entered. To
again allow access, the Access Lock Release function in Admin. Mode must
be performed. Contact the Administrator to perform the Access Lock
Release function.

If the BOX Utility is being used to backup or restore, the message “This
mode cannot be used due to remote operation. DO NOT turn off main
switch.” appears. Wait a while, and then try accessing the User Box again.

Advertising