Konica Minolta bizhub 4750 User Manual

Page 14

background image

[Fax Functions]



Sending (basic operation flow)



Tap [Application], then configure fax option settings.

% Before scanning the original on this machine, specify the size of the original to be scanned. If you

fail to set the original size correctly, the image may be cut off. For details on how to specify the orig-
inal size, refer to page 3-12.

% For details on configuring option settings, refer to the respective columns of the following table.


Press the Start key.

% Tap [Check Settings] before sending data, and check the specified destination and settings if nec-


% To redo operations for specifying destinations or option settings, press the Reset key.

% If you press the Stop key while scanning the original, scanning stops. To cancel scanning the orig-

inal, delete inactive jobs from the Job screen.

Sending starts.


Sender Information is automatically added to a fax to be sent.

Related setting


You can change the defaults of fax sending options to suit your environment.
To configure settings: [Utility] - [User Settings] - [Scan/Fax Settings] - [Default Fax Settings]


If necessary, you can change the default of the Fax screen.
To configure settings: [Utility] - [User Settings] - [Custom Display Settings] - [Scan/Fax Settings] - [Fax
Default Tab] (default: [Favorites])



To configure basic options such as original size and resolution

page 3-12

To specify the method to scan the original

page 3-12

To adjust the image quality or density depending on the contents of the original

page 3-13

This manual is related to the following products: