Konica Minolta bizhub 4750 - Manual (Page 36)

[Fax Functions] 4-11
4.10 Sending a fax with a password ([Password TX]) 4
4.10 Sending a fax with a password ([Password TX])
Password TX
The Password TX is a function that sends a fax with a password. It is used to send faxes to a device on which
fax peers are restricted by passwords (a device with Closed Network RX enabled).
Tips
- You can only use this function to communicate with our models supporting the closed network recep-
tion (password) function.
- You need to check the recipient's closed network reception password beforehand.
- This function cannot be used together with the following functions:
F-Code TX, Polling TX, Polling RX
d
Reference
This machine can restrict fax destinations using the Closed Network RX function. For details on the Closed
Network RX function, refer to page 6-10.
Operation flow
1
Load the original.
2
Tap [Fax].
3
Specify the destination.
4
Tap [Application] - [Fax Setting] - [Password TX], then tap [ON].
5
Using the Keypad, enter the Closed Network RX password of the destination, then tap [OK].
% To display the Keypad, tap the input area for the numeral.
6
Press the Start key.
Sending starts.