Konica Minolta bizhub 4750 User Manual
Checking the recipient status before sending (manual transmission)
Check that [Send] is selected and specify a fax number.
% To specify a fax number, directly enter a target number, or specify a desired number from the reg-
istered destinations. For details on how to specify a destination, refer to page 3-9.
% To redo operations for specifying destinations or option settings, press the Reset key.
As signal sounds are heard, tap [Start] or press the Start key.
Sending starts. If you are using a phone, replace the handset.
% If you press the Stop key while scanning the original, scanning stops. To cancel scanning the orig-
inal, delete inactive jobs from the Job screen.
This manual is related to the following products: