Konica Minolta bizhub 4750 - Manual (Page 30)

[Fax Functions] 4-5
4.4 Checking the destination fax number before sending a fax ([Check Dest. & Send]) 4
4.4 Checking the destination fax number before sending a fax
([Check Dest. & Send])
Check Dest. & Send
The Check Dest. & Send function checks the fax number specified for the fax transmission against the des-
tination fax number (CSI) and sends the fax only when they match.
If the specified and destination's fax number information (CSI) does not match, transmission fails. This pre-
vents misdirected transmissions.
Tips
- The fax number of the originating machine must have been in the destination machine.
- When registering destinations with an address book, you can enable Check Dest. & Send in addition to
registering fax numbers.
Operation flow
1
Load the original.
2
Tap [Fax].
3
Specify the destination.
4
Tap [Application] - [Fax Setting] - [Line Setting].
5
Tap [Check Dest. & Send] to select the check box, then tap [OK].
6
Press the Start key.
Sending starts.