Konica Minolta bizhub 4750 - Manual (Page 41)

[Fax Functions] 5-3
5.2 Receiving a fax manually 5
5.2 Receiving a fax manually
Manual RX
Manual RX is a mode that enables manual reception of incoming faxes using the Off-Hook key. This function
is useful when a telephone is connected to this machine where the line is used both for phone and fax oper-
ations, the telephone is used frequently, and where you always prefer to receive faxes manually.
If a phone is connected, the phone rings when there is an incoming call (a voice or fax call). When the phone
rings, pick up the handset and confirm that there is an incoming call to ensure the reception of a fax.
Operations required to use this function (for administrators)
To use Manual RX, the following settings are required.
- Set [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [RX Mode] to [Manual
RX] (default: [Auto RX]).
Operation flow
1
Tap [Fax].
2
Tap [Off-Hook].
% If you are using a phone, pick up the handset.
3
Check that [Receive] is selected.
4
Tap [Start].
Reception begins. If you are using a phone, replace the handset.