Konica Minolta BIZHUB C652DS - Manual (Page 133)

bizhub C652/C652DS/C552/C552DS/C452 7-28
7.4 Print - Application (Public, Personal, or Group User Box) 7
7.4.13 Stamp/Composition - Stamp Repeat
Text or an image is repeatedly printed on all pages. Copy Protect stamps are used to prevent recopying.
However, Stamp Repeat stamps can be recopied.
You can apply up to eight strings or stamps. If you set the angle of strings or stamps to 45 degrees (or -45
degrees), however, the number of areas in which you can place strings or stamps is limited to 4.
In the Stamp Repeat screen, you can configure the following settings.
Stamp Repeat Type
Item Description
Stamp Repeat
Type Select a type of stamp repeat to be printed.
Detail Settings Specify the color, density, and text size of stamp repeat to be printed.
Position Select the angle or printing order of stamp repeat to be printed.
Item Description
[Registered
Stamp] Press this button to apply the stamp images that were pre-registered with the utility
software.
•
Use "Copy Protection Utility" to register stamps. For details, refer to the relevant
utility software manual.
• Registered stamps may require multiple areas depending on their contents.
[Preset Stamp] Press this button to apply a standard string such as Invalid Copy, Copy, or Private
as a preset stamp. One stamp requires one area.
[Date/Time] Press this button to apply the date and time the document was registered.
•
[Date Format] requires one area.
• [Time Format] requires one area.
[Other] Press this button to apply the job number, serial number, and distribution control
number the document was registered with.
•
[Job Number]: The job number for the print job is printed. A job number requires
one area.
• [Serial Number]: The serial number assigned to this machine is printed. The serial
number requires one area. The serial number is assigned at the time of shipment
of this machine. For details on settings, contact your service representative.
• [Distribution Control Number]: The entered number of copies is printed. A distri-
bution control number requires one area. Enter the distribution control number,
and select "Number Only" or "Put zeros in front(total 8-digits)" as the output for-
mat.