Konica Minolta BIZHUB C652DS - Manual (Page 32)

bizhub C652/C652DS/C552/C552DS/C452 3-3
3.1 Control panel 3
7 CAUTION
- Do not apply extreme pressure to the touch panel, otherwise the touch panel may be scratched or
damaged. Never push down on the touch panel with force, and never use a hard or pointed object to
make a selection in the touch panel.
9 [Stop] Pressing the [Stop] key during scanning temporarily stops the scan op-
eration.
10 [Proof Copy] Press this key to print a single proof copy to be checked before printing
a large number of copies. You can check the finishing state on the touch
panel by pressing this key before scanning or copying.
•
This key is not available when saving documents by pressing the [Us-
er Box] key.
• To check the preview image when saving in a User Box, press the
[Fax/Scan] key. For checking preview procedure, refer to the
"User's Guide [Network Scan/Fax/Network Fax Operations]".
11 [Start] Press this key to start scanning. When this machine is ready to begin a
scan operation, the indicator on the [Start] key lights up in blue. If the in-
dicator on the [Start] key lights up in orange, scan operation cannot be
started. Press this key to restart a stopped job.
12 Data indicator Flashes in blue while a print job is being received. Lights up in blue when
data is being printed.
13 [C] (Clear) Press this key to erase a value (such as the number of copies, a zoom
ratio, or a size) entered using the keypad.
14 Keypad Use this keypad to enter the number of copies to be produced, the zoom
ratio, and the various other settings.
15 [Guidance] Press this key to display the Guidance screen. From this screen, you can
view descriptions of the various functions and details of operations.
16 [Enlarge Display] Press this key to enter Enlarge Display mode. If you use PageScope Au-
thentication Manager for authentication, the Enlarge Display screen is
not available.
17 [Accessibility] Press this key to display the screen for configuring settings for user ac-
cessibility functions.
18 [Access] If user authentication or account track settings have been applied, press
this key after entering the user name and password (for user authentica-
tion) or the account name and password (for account track) in order to
use this machine. Press this key to log off from the machine as well.
19 [Brightness] dial Use this dial to adjust the brightness of the touch panel.
20 [User Box] Press this key to enter User Box mode. While the machine is in User Box
mode, the indicator on the [User Box] key lights up in green.
21 [Fax/Scan] Press this key to enter Fax/Scan mode. While the machine is in Fax/Scan
mode, the indicator on the [Fax/Scan] key lights up in green. For details
on the fax and scan functions, refer to the "User's Guide [Network
Scan/Fax/Network Fax Operations]".
22 [Copy] Press this key to enter Copy mode. (The machine is in Copy mode in de-
fault. )While the machine is in Copy mode, the indicator on the [Copy] key
lights up in green. For details, refer to the "User's Guide [Copy Opera-
tions]".
No. Name Description