Timer transmission (timer tx), Password transmission (password tx), F-code transmission (f-code tx) – Konica Minolta BIZHUB C652DS User Manual

Page 163: Timer transmission (timer tx) -58, P. 7-58)

Advertising
background image

bizhub C652/C652DS/C552/C552DS/C452

7-58

7.6

Send (Public, Personal, or Group User Box)

7

Timer transmission (Timer TX)

Specify the sending time. Transmitting faxes in discount telephone rate hours such as late at night or early in
the morning will reduce the cost. Use the keypad to specify the communication starting time.

Reference

-

It is specified in hours and minutes.

-

You cannot specify the date.

Password transmission (Password TX)

Use this function to send a document by attaching a password. If the recipient's fax machine is set to closed
network reception, the sender's fax machine should transmit the same password as used for the closed
network reception.

Reference

-

You can use this function only when the remote machine is our model and supports the closed network
reception (with password) function.

-

Use the keypad to enter the password.

F-Code transmission (F-Code TX)

This function allows you send documents to a specific User Box of the remote machine by entering the SUB
address and the password. F-Code TX can be used for the confidential transmission and relay transmission
functions.

Reference

-

To use the F-Code for transmission, the remote machine must support the F-Code function.

Item

Description

Confidential TX

Documents are sent to the Confidential RX User Box of the remote machine. Enter
the destination User Box number in the SUB Address box and the confidential trans-
mission password in the Password box.

Advertising
This manual is related to the following products: