2 configuring ipv6, Automatically obtaining the ipv6 address – Konica Minolta Bizhub 215 User Manual

Page 23

Advertising
background image

bizhub 215

3-12

3.4

Network Settings

3

11

On the Control Panel, press the Reset key.

% When the following screen appears, turn the power on and off to restart the machine in order to en-

able the settings.

3.4.2

Configuring IPv6

1

Press +, to select [IPv6], then press OK.

2

Press +, to select [DISABLE/ENABLE], then press OK.

3

Press +, to select [DISABLE] or [ENABLE], then press OK.

If [DISABLE] is selected, [ACCEPTED] appears and the screen returns to the IPv6 Settings screen.

% IPv6 is now disabled and so no settings appear subsequently. Select [RETURN] and press OK to

return to the Network Settings screen. If [ENABLE] is selected, [ACCEPTED] appears and the screen
returns to the IPv6 Settings screen.

% Proceed with configuration of the remaining settings for IPv6.

Tips

-

If you have selected [ENABLE], configure the following settings as needed.

AUTO SETTING (page 3-12)

LINK LOCAL (page 3-13)

GLOBAL ADDRESS (page 3-13)

PREFIXED LENGTH (page 3-13)

GATEWAY ADDRESS (page 3-14)

Automatically obtaining the IPv6 address

1

Press +, to select [AUTO SETTING], then press OK.

2

Press +, to select [OFF] or [ON], then press OK.

If [OFF] is selected, [ACCEPTED] appears and the screen returns to the IPv6 Settings screen.

% As the IPv6 address is not automatically obtained, you need to configure the remaining settings

manually.

If [ON] is selected, the screen returns to the IPv6 Settings screen.

Advertising