Konica Minolta bizhub 42 - Manual (Page 24)

bizhub 42/36 3-6
3.2 Basic copy operations 3
5
Press [ ↓] to display [2/3], and configure each function.
% For details on [Density], refer to page 5-9.
% For details on [Original Type], refer to page 5-10.
% For details on [Finishing], refer to page 5-11.
% For details on [Proof Copy], refer to page 5-13.
6
Press [ ↓] to display [3/3], and configure each function.
% For details on [Separate Scan], refer to page 5-14.
% For details on [ID Copy], refer to page 5-15.
% For details on [Paper Margin], refer to page 5-17.
% For details on [Image Quality], refer to page 5-18.
7
Press [Mode Check].
% For details on [Mode Check], refer to page 5-19.
8
Using the Keypad, enter a value for the number of copies you desire.
% If you have entered incorrect number of copies, press the C (clear) key on the keypad, and then re-
enter the correct number.
9
Press the Start key.
The original is scanned and copied.