Konica Minolta bizhub 42 - Manual (Page 42)

bizhub 42/36 5-2
5
5 Copy Function
You can configure the settings for multiple copy features by pressing buttons on the Control Panel or Touch
Panel.
This chapter describes the functions that can be configured by pressing the buttons in the Touch Panel.
Others
Item (Page 1/3)
[Original Size] Press this button to specify the size of the original to be scanned. p. 5-3
[Paper] Press this button to configure the paper type and paper tray for making
copies. p. 5-4
[Zoom] Press this button to select the zoom ratio of the image to be copied. p. 5-6
[Duplex/
Combine] Press this button to configure the double-sided copy and combined copy
settings. p. 5-7
Item (Page 2/3)
[Density] Press this button to specify the density for making copies. p. 5-9
[Original Type] Press this button to specify the image quality of the original according to its
type. p. 5-10
[Finishing] Press this button to select the settings for sorting and the finishing state of
copies. p. 5-11
[Proof Copy] Print a single proof copy for checking before printing a large number of
copies. p. 5-13
Item (Page 3/3)
[Separate Scan] Select this item to divide a large number of original and scan it in a number
of batches. p. 5-14
[ID Copy] Copies the contents of the front and back sides of a card-size original, for
example, insurance card, driver's license, or business card, on one sheet. p. 5-15
[Paper Margin] Copies can be printed with a binding margin (blank area) so that the pages
can easily be filed. p. 5-17
[Image Quality] Select this item to specify the image quality of a copy on the basis of the
image quality and type of the original so that the quality of the copy can be
adjusted. p. 5-18
Item
[Mode Check] Press to check the currently specified copy settings. p. 5-19
[Job] Press to check a print, transmission, reception or stored data job. p. 5-20
[?] Press this key to view and check descriptions of copy functions and oper-
ating procedures. p. 3-8