Konica Minolta bizhub 42 - Manual (Page 66)

bizhub 42/36 6-5
6.2 [Copy Settings] 6
6.2 [Copy Settings]
Configure the settings used by the copy functions.
%
Press the Utility/Counter key ö [User Settings] ö [Copy Settings].
Settings
[Auto Zoom for Combine] Configure whether the preset zoom ratios are automatically selected when
Combine is selected in Auto Paper mode.
•
Select the Auto Zoom for Combine for the following zoom settings:
<Inch area> 2 in 1: 64.7%
<Metric area> 2 in 1: 70.7%
4 in 1: 50.0%
[Default Copy Settings] Configure the initial values for the Copy function to be displayed when the
power in turned on or the Reset key is pressed.
[Factory Default] The factory settings are used as the default set-
tings.
[Current Setting] The current settings are used as the default set-
tings.
[Separate Scan Output
Method] Configure the output for divided original loaded in the ADF or for multiple
pages of the original scanned on the Original Glass.
[Batch Print] Printing begins after all pages of the original have
been scanned.
[Page Print] Printing of copies that can be printed begins while
the original is being scanned.
Factory default
[Auto Zoom for Combine] [Yes]
[Default Copy Settings] [Factory Default]
[Separate Scan Output
Method] [Page Print]