Konica Minolta bizhub 42 - Manual (Page 40)

bizhub 42/36 4-14
4.6 Interrupt 4
4.6 Interrupt
Press this key to start a new copy job with different copy settings by suspending the current job in process.
This is convenient when you need to make copies urgently.
0 The Interrupt key cannot be operated while an original is being scanned.
0 Pressing the Interrupt key restores the default settings.
1
Load the original.
2
Press the Interrupt key.
The indicator on the Interrupt key lights up in green and printing of the current job is suspended.
3
Configure the copy settings.
4
Press the Start key.
5
After the interrupting job has finished printing, press the Interrupt key.
The Interrupt indicator goes off and the interrupting copy settings are canceled.
The copy settings return to those specified before the interrupting copying job.