Konica Minolta bizhub 181 - Manual (Page 197)

6 Utility mode/Copy mode parameters
6-2 bizhub 181
U
tility mode/Copy
mode parameters
Chap
te
r 6
6 Utility mode/Copy mode parameters
6.1 Utility mode
There are eight parameter in the Utility mode.
2
Note
Depending on the options installed, some parameters may not be avail-
able. If an unavailable parameter is selected, an error message appears.
No. Name Description Page reference
1 MACHINE SET-
TING Used to specify settings for the machine’s oper-
ating environment. p. 6-5
2 PAPER SOURCE
SETUP Used to specify the size and type of paper load-
ed in the 1st paper drawer. In addition, settings
can be specified for the paper drawers that are
selected during the automatic tray switching op-
eration. p. 6-18
3 CUSTOM SIZE
MEMORY Used to register up to two custom paper sizes. p. 6-27
4 USER MANAGE-
MENT Used to perform maintenance operations in or-
der to maintain the machine’s efficiency. p. 6-30
5 ADMIN. MAN-
AGEMENT Used by the administrator to specify settings for
managing the accounts and to specify remote
monitoring settings. p. 6-34
6 COPY SETTING 1 Used to specify the default settings for the vari-
ous copy functions. p. 6-52
7 COPY SETTING 2 p. 6-67
8 DIAL REGISTRA-
TION This menu item appears only when optional im-
age controller IC-206 or network interface card
NC-503 is installed.
Specify speed dial settings.
For details, refer to the User’s Guide for the cor-
responding option. -
9 SCAN SETTING Used to specify settings when optional image
controller IC-206 or network interface card NC-
503 is installed on the machine. For details, refer
to the User’s Guide for the corresponding op-
tion. -