Konica Minolta bizhub C25 - Manual (Page 150)

Specifying Printer Driver Settings 2-13
Printer Driver Settings
Options Installed
General
Parameters Settings
[Paper Source Unit] Select Unit 3 if an optional lower feeder unit
for the printer has been installed.
- The default setting is [Disabled].
[Storage] Select [None], [CF(1GB Over)] or [HDD] for
the storage unit that is installed.
- The default setting is [None].
[Duplex Unit] Select the setting for the duplex unit.
- The default setting is [Enabled].
[Printer Memory] Select [256 MB] or [768 MB] if an optional
memory for the printer has been installed.
- The default setting is [256 MB].
Parameters Settings
[Paper Type] Specifies the paper type as [Auto], [Plain
Paper], [Recycled], [Glossy1 (100 - 128g/
m
2 )], [Glossy 2 (129 - 158g/m 2 )], [Label],
[Thick 1 (91 - 150g/m 2 )], [Thick 2 (151 - 210g/
m 2 )], [Letterhead], [Envelope], [Postcard],
[Single Side Only (60 - 90g/m 2 )], or [Special
Paper (60 - 90g/m 2 )].
- The default setting is [Auto].
[Paper Source] Specifies the paper source as [Tray 1], [Tray
2], [Tray 3], [Tray 1 (Manual Feed)], or [Auto].
- The default setting is [Tray 1].
[Manually Print on 2nd
side] Select whether or not to print on the back
side of paper that has already been printed
on.
- The default setting is [Off].
[Paper Sizes] Specifies the paper size. An irregular paper
size cannot be selected.