Konica Minolta bizhub C25 User Manual
Page 165
Printing With NetWare
3-6
5
In Administrator mode of PageScope Web Connection, select [NetWare]
from the [Network] tab, and then specify the following settings.
–
[NetWare Print]: Select [Enable].
–
[Frame Type]:
Select [Auto]. (Select the frame type according to the network
environment.)
–
[Mode]: Select [NPrinter/RPrinter].
–
[Printer Name]:
Specify the printer name. (Default: BHC25-XXXXXX)
–
[Printer Number]:
Specify the printer number (0-255). When 255 is specified, the
setting is [Auto].
6
Restart the printer (turn the printer off, then on again)
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that created printer is shown as [Waiting for Job] for the con-
nected printer (0).