Configuring the printer 9-93 – Konica Minolta bizhub C25 User Manual
Page 380
Configuring the Printer
9-93
[Fuser Unit
End]
Specifies whether or not a notification is
sent when the fuser unit has reached the
end of its service life.
Choices: [Enable], [Disable]
Default: [Enable]
[Operator Call] Specifies whether or not a notification is
sent when the operator must be called.
Choices: [Enable], [Disable]
Default: [Enable]
[Service Call]
Specifies whether or not a notification is
sent to the service representative when a
condition occurs that requires servicing.
Choices: [Enable], [Disable]
Default: [Enable]
[Job Complete] Specifies whether or not a notification is
sent when a print job is completed cor-
rectly.
Choices: [Enable], [Disable]
Default: [Enable]
[Job Error]
Specifies whether or not a notification is
sent when a job could not be printed
because an error occurred.
Choices: [Enable], [Disable]
Default: [Enable]
[Apply] button
Applies the configuration settings for this
window.
[Clear] button
Resets all configuration settings to previ-
ous values.
Item
Description