Konica Minolta bizhub C25 - Manual (Page 537)

Configuring the Printer 9-250
[TTLS Authentication
Type] Specify the EAP-TTLS phase 2 authentication pro-
cedure. Specifies the TTLS anonymous type, when
[EAP Type] is set to [EAP-TTLS] or [Server Specifi-
cation].
Choices: [PAP], [MS-CHAP], [MS-CHAPv2]
Default: [MS-CHAPv2]
[Server Certificate
Check] Specify the items where the server certificate is ver-
ified. Specifies the server certificate check, when
[EAP Type] is set to [EAP-TLS], [EAP-TTLS] or
[PEAP].
Choices: [Validity], [CA Chain], [Server ID]
d
You can select multiple items from the
available choices.
Default: [Validity]
[Send Client Certifi-
cate] Select whether or not the client certificate is sent
when the client certificate is requested by the
server. Specifies the send client certificate, when
[EAP Type] is set to [EAP-TTLS] or [PEAP].
Choices: [Enable], [Disable]
Default: [Disable]
[Client Certificate] Shows whether or not a client certificate has been
specified.
d
Specify the settings from the [Network] -
[SSL/TLS] page.
[CA Certificate] Shows whether or not a CA certificate has been
specified for CA reliability verification of server cer-
tificates.
d
Specify the settings from the [Network] -
[Authentication] - [CA Certificate] page.
Item Description