Konica Minolta bizhub C25 - Manual (Page 504)

Configuring the Printer 9-217
The [Network] - [SNMP] window allows you to configure the following items:
Item Description
[SNMP] [SNMP] If [Enable] is selected, [SNMP] is enabled.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] -
[NETWORK SETTING] - [SNMP]
[SNMP v1/
v2c(IP)] If [Enable] is selected, [SNMP v1/v2c(IP)] is
enabled.
Choices: [Enable], [Disable]
Default: [Enable]
[SNMP
v3(IP)] If [Enable] is selected, [SNMP v3(IP)] is enabled.
Choices: [Enable], [Disable]
Default: [Enable]
[SNMP
v1(IPX)] If [Enable] is selected, [SNMP v1(IPX)] is enabled.
Choices: [Enable], [Disable]
Default: [Enable]
d
In order for this parameter to be available,
[NetWare Print] in the [Network] - [NetWare]
page must be set to [Enable].
[UDP Port] Specifies the UDP port number.
Range: 1 - 65535
Default: [161]
d
The numbers 427 and 500 cannot be
specified.