Konica Minolta bizhub C25 - Manual (Page 461)

Configuring the Printer 9-174
The [Network] - [TCP/IP] - [IPv4 Settings] window allows you to configure the
following items. For more information on these TCP/IP, see chapter 8, “Net-
work Printing”.
Item Description
[Auto IP] Specifies the automatic assigning method for the printer
IP address.
Choices: [DHCP], [BootP], [ARP/PING]
d
You can select multiple items from the available
choices.
Default: [DHCP]
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [DHCP, BOOTP, ARP/PING]
[IP Address*] Sets the printer’s IP address.
Range: 0–255 for each xxx triplet
Default: [0.0.0.0]
d
If the specified IP address is outside of the
allowable range, the value is not changed, even
after the [Apply] button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [IP ADDR. SETTING]
[Subnet Mask*] Sets the printer’s subnet mask address.
Range: 0–255 for each xxx triplet
Default: [0.0.0.0]
d
If the specified subnet mask address is outside of
the allowable range, the value is not changed, even
after the [Apply] button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [IP ADDR. SETTING]