Konica Minolta bizhub C25 - Manual (Page 399)

Configuring the Printer 9-112
[Logical Tray 0-9] Select the tray that is used for printing when a print
job is received from another manufacturer’s printer
driver.
The default setting for [Logical Tray 1] is [Physical
Tray 1]. The default setting for all other trays is
[Physical Tray 2].
Choices: [Physical Tray 1], [Physical Tray 2],
[Physical Tray 3]
Configuration Menu Equivalent:
[PS/PCL PRINT] - [PAPER MENU] - [TRAY
MAPPING] - [LOGICAL TRAY0-9]
d
[Physical Tray 3] appears only if an optional
lower feeder unit is installed.
[Apply] button Applies the configuration settings for this window.
[Clear] button Resets all configuration settings to previous values.
Item Description