Konica Minolta bizhub C25 - Manual (Page 270)

Network Printing 8-23
Making the printer driver known from the Network window
To use Web service print in Windows Vista/7/Server 2008/Server 2008 R2,
install the printer driver before making it known to the computer with plug
and play.
1
Install the printer driver for this machine.
Install the printer driver using the installer or Add Printer Wizard.
The printer driver can be installed in any port.
2
Turn on the power of the machine while it is connected to the network.
- Since the printer is searched for, be sure to connect the machine to the
network.
3
To use the Web service print, check that [Network discovery] is enabled
in [Network and Sharing Center] on the computer.
4
Open the [Network] window.
- In Windows Vista/Server 2008, click [Start], and [Network].
- In Windows 7/Server 2008 R2, open [Computer] and click [Network].
If [Network] is not displayed in [Computer], click the [Network and Inter-
net] category on the [Control Panel], and also click [View network com-
puters and devices].
Connected computers and devices are detected.
5
Select the device name of the machine, and then click [Install] on the
toolbar.
The printer driver for this machine is detected and the machine is ready
to print.
6
After finishing the installation, make sure that the icon for the installed
printer is displayed in the [Printers] or [Devices and Printers] window.
d
If the printer driver is not correctly installed, the driver must be
updated using [Update Driver ...]. For details, refer to “Updating the
driver after connecting this machine” on page 8-33.
d
In Windows Vista/Server 2008, you can continue the task and specify
the printer driver installation disk to install the printer driver if it is not
installed in advance.
When the [Found New Hardware] window appears, follow the dis-
played messages to perform the procedure. For details, refer to
“Adding a printer from the Network window” on page 8-24.
d
In Windows 7/Server 2008 R2, you cannot specify the installation disk
after the machine is connected to the computer. Install the printer
driver in advance (Step 1).