Konica Minolta Printgroove - Manual (Page 102)

Start Printgroove POD Ready 4
Printgroove POD Ready 4-21
2
Select the product type.
[Original Paper Size Setting] dialog appears.
– About Product Type, please refer to “Product Type” on page 3-8.
3
Select original paper size from [Original Size].
– When you want to set custom paper size, follow the procedures of
“Page Type” on page 5-39
4
To use Wide Paper, check [Wide Paper].
– When you check, [Original Paper Size Setting] dialog expands. In
this case, select [Top], [Center], or [Bottom] as print position.